Underground Drainage System Experts
There could be a lot of water damage if you live near a canal, lake, or river and the water table is high in your neighborhood. You think your home is safe, so you don’t do anything to protect it. This area could flood in the future because of heavy rain, flooding, or rising water levels.
To figure out how much work needs to be done and how much it will cost, talk to Gutter Medics, the best gutter cleaning and repair company near me. Call us at (630) 922-3131 or email us about our Underground Drainage and other services!
What Is Underground Drainage?
As a general rule, this pipe takes the wastewater out of your Underground Drainage. It has both dirty water and rainwater in it. Other waste pipes, such as those in your toilet and shower, and those in your bathroom sink and kitchen, also belong.
Underground drainage is an essential part of any construction project. It can be built into a new home or added to an existing one. You must know how underground sewage works and what you need to do to do a good job.
How Does It Work?
The network of pipes starts with the first point where water comes out of them. It is usually found in the bathroom, but sometimes you can find it in the kitchen.
An inspection chamber is where the pipes from the outlets go. Access hole covers connect the inspection chamber to other lines and outlets.
These are buried in the ground or on the surface, depending on the structure of your home.
Before they reach a sewer station, the smaller pipes connect to bigger ones that run under the road. All the waste and water from the lines are cleaned and recycled there.
7 Parts Of Underground Drainage
Several types of underground drainage can be used in different circumstances.
1. Channel Drains
People use channel drains to let water flow into a pipeline under the ground, and a pipe will take the water away. Channel drains are often used on patios and driveways to eliminate rainwater. For example, one of our customers installed a channel drain on their driveway to get rid of water from their car’s engine after they washed it. They did this to get rid of the water.
Soaks are underground tanks that hold water and allow it to flow into the ground naturally without being pumped out. The most common use for them is when other sewage systems are not possible or practical. Use a soakaway to keep your home from getting flooded if it is in an area with a lot of groundwater.
3. Sewer Pipes
As you get rid of waste, it goes through pipes that run through your town or city. These pipes connect your sewage system to the main sewage line that runs through your neighborhood. For example, if you live in an area with many people and want to add plumbing fixtures like toilets, showers, and dishwashers. You’ll need to connect them to the sewer so they can flush away. You can connect more fixtures to a larger pipe to use it for more things.
A “manhole” or “maintenance hole” is a large hole in the ground that gives maintenance workers easy access to the drains below. They don’t have to dig up the ground above. Depending on what you need them for, you can use them at the start or end of your sewage system.
Your sewage system is made up of pipes. These pipes carry wastewater away from your home and into a utility hole or a sewer line. There are many different kinds of tubes, like clay pipes, concrete pipes, plastic pipes, etc.
Gullies collect water from drains and pipes and funnel it into a manhole or sewer line. They are available in a variety of sizes based on the amount of water they must manage.
7. Inlets And Outlets
Catch pits, or inlets, collect water from gutters and downpipes. These people direct the water into a drain or pipe, taking it away.
Water from your sewage system can be released into an area of natural water, like a river or stream. You can use outlets (also called discharge points) to do this.
Underground Drainage: Pros And Cons
There are both good and bad things about underground drainage systems.
There are both good and bad things about having an underground drainage system. These things need to be taken into account before making your final decision.
- Improved drainage
It can make your home less likely to flood.
- Less work to do
It only needs a little more work than a traditional gutter and downpipe system. There are no gutters to clean or clogged downspout drains to unclog.
- Aesthetically pleasing
There are no gutters or downpipes to see. It makes it look better than a gutter and downpipe system.
It will last for a long time. Like a traditional gutter and downpipe system, this one won’t rust or corrode like the old one did.
It can be costly to put in.
Putting in an underground drainage system means digging trenches on your land.
Underground drainage systems only need as much work as traditional gutters and downpipes. However, they still need to be checked and cleaned regularly.
What Materials Are Used In Underground Drainage Pipes?
For underground drainage, PVC is the most common type of pipe used, but you can also find concrete, clay, and metal pipes in some places. Many people choose PVC because it is solid and inexpensive. It also doesn’t rust or corrode; it’s easy to put in and doesn’t get dirty.
What Are The Different Sizes Of Underground Drainage Pipes?
It’s most common for drainage pipes to be 110 mm wide, but there are also pipes in other sizes like 160 mm, 200 mm, and 300 mm. If you need to get rid of a lot of water, you’ll need a different size. Some examples: A three-bedroom house will need a 110 mm pipe. A more prominent place, like a five-bedroom home, will need 160-mm pipes.
Common Problems With Underground Drainage Systems
People need help with their underground drainage systems. These are some of them:
A clogged underground gutter drain is one of the most common problems. If leaves and other debris get stuck in pipes, they can cause drains to become blocked. Blockage can cause water to back up and flood your basement if it is too bad.
Cracks In Pipes
Over time, the underground drainage pipes can start to crack and leak. It is usually due to age or the settling of the house. It is essential to repair any cracks in the lines as soon as possible to avoid further damage.
Tree roots can also cause problems with your underground drainage system. The seeds can grow into the pipes and block the flow of water. In some cases, the roots can even crack the pipes.
If you have problems with your underground drainage system, you must call a professional. They will be able to diagnose the problem and make the necessary repairs.
How To Prevent Problems With Your Underground Drainage System?
You can do a few things to prevent problems with your underground drainage system. These include:
It is essential to have your underground drainage system inspected and cleaned regularly. It will help prevent any blockages or leaks.
Use A Drain Cover
You can also use a drain cover to prevent leaves and other debris from getting into your pipes.
Take Caution With What You Flush
When using your toilet, be careful what you flush. Try to avoid flushing anything other than human waste and toilet paper.
Avoid Planting Trees Near Your Pipes
Choose a species with shallow roots if you must plant trees near your underground downspout drain system.
If you follow these tips, you can help prevent problems with your underground drainage system. If you have a problem, call a professional as soon as possible. They will be able to repair the damage and get your system back up and running smoothly.
Why Do You Need To Hire A Professional For Underground Drainage?
To get underground drainage, many people need to work together to make it happen. In this case, hire a pro. Making mistakes is not worth it, so don’t do it.
They will also know how to install underground drainage without making things worse, so they can help you. Is it easy to understand? If you have problems that need to be solved, a professional can help you.
They will do everything right to ensure that any future maintenance or repairs are simple; hire a pro. Save money in the long run by not having your car fixed.
Getting help from a professional is always the best way to set up a drainage system. The first time they do it right, you won’t have to worry about it.
Your drainage system is one of the essential parts of your home, and it needs to work at all times. That’s where a professional Gutter Medics repair person comes in. They offer a wide range of services to help keep your system in tip-top shape. We know what it takes to get the job done, and we’re ready to take on any size job you have. Call us at (630) 922-3131 or email us today to learn more about our services!
Gutter Medics Offers Services As Follows:
Articles We’ve Hand-Picked For You:
Frequently Asked Questions
A series of collection sites lead to underground pipes that dump into a downhill location with underground drainage. Collection sites include downspouts from gutters and grates in strategic low points throughout the yard or garden
For drain pipes, a depth of 12 to 18 inches is ideal, but the depth of the pipe may vary in order to maintain a downward slope, which is critical for proper drain functioning.What Is The Recommended Depth Of A French Drain Around A House?
The depth of a French drain should be between 8 inches and 2 feet for most water-diverting projects, though related systems, such as those built around foundations and sub-ground living spaces, as well as the bases of retaining walls, may be deeper.How Do You Dig A Drainage Trench?
Make a trench 18 inches deep and 9-12 inches wide. In the trench, lay 3 inches of gravel and then 3 inches of water-permeable landscaping fabric. Fill the trench with 3 inches of gravel and cover the drainage ditch with rocks, soil, or stones.
You must excavate a trench around the perimeter of your footing. A trench at least two feet wide and six feet deep is required. The trench for a slab-on-grade house can be as shallow as two feet.
The main problem with a drainage system is that it speeds up the loss of nitrogen and other salts, which can lead to eutrophication or make streams and rivers saltier. Most of the time, the downsides can be avoided by using the right irrigation methods and following the standards for irrigation water.
The standard slope for proper concrete drainage is a one-quarter-inch drop for every foot of length. So, to calculate the difference in height between one end of a patio or walkway and another, simply multiply the length by one-quarter.
Surface drains and French drains are the two main types of drainage system options. Surface drainage systems are made up of a few ground-level drains connected to PVC piping. Water flows down the drains, into the piping, and is transferred away from the house when it rains.
Polyvinyl Chloride pipes are the most commonly used drainage pipes. PVC pipes can be made in almost any size due to the material’s malleability. These pipes are ideal for drainage applications where the water and environment exert a lot of pressure and weight.
Gravity is used by your home’s drainage system to pull water through the house and outside to drain. Waste and dirty water are piped through a “Soil Stack,” which then transports the waste to a main drain, which is usually located beneath the house.
Drainage systems can use pipes, open channels, natural surface channels, and canals, especially in the minor system network. In an urbanized (or becoming urbanized) catchment, open channels and natural watercourses would almost certainly be part of the main drainage system.